As an important component of aquaculture, the quality of feed has a direct impact on production efficiency and product quality. One important part of the feed production process is the small aperture ring die holes. Hongyang Machinery focuses on the impact of ring die quality on feed particle quality, especially on the impact of small aperture ring die holes on aquaculture feed production. After years of research, the following conclusions have been reached:
The quality of small aperture ring die holes directly affects the size and shape of the feed particles.
The size and shape of the feed particles have a certain impact on the feeding habits and digestion rate of fish or crustaceans. Smaller fish or young fish are more suitable to eat small particles of feed. Consistent aperture size of ring die holes can ensure the production of feed particles in precise and uniform sizes, which is conducive to the digestion and absorption of feed in water and fish bodies, and can increase the productivity of aquaculture.
The quality of small aperture ring die holes also affects the compaction of the feed.
The feed needs to be pressed into pellets during the production process, which determines the density and hardness of the feed. Lower density and hardness will cause the feed particles to decompose too quickly in water, thereby affecting the nutritional value and productivity of aquaculture. The diameter accuracy of small aperture ring die holes can control the compaction of the feed particles, ensuring that the feed density and hardness are within the appropriate range, improving feed stability and nutritional value.
The shape of small aperture ring die holes is generally polyhedral, which is conducive to increasing the aperture surface area, increasing feed output, and improving the productivity and economic benefits of aquaculture.
Therefore, small aperture ring die holes play a crucial role in aquaculture feed production. Hongyang Feed Machinery mainly controls key parameters such as aperture diameter, polyhedral shape of the aperture, and aperture size error during the manufacturing process to ensure standardization of ring die hole quality. This results in high-quality feed production and improves the production efficiency and product quality of aquaculture.
Post time: May-22-2023